How to Change the Fuel Hose on a 2-Cycle Engine?

A coughing or sputtering chainsaw or weed eater could be the sign of a bad fuel line. These gardening tools use what is known as a 2-cycle engine to provide power. These engines are used in smaller tools and other devices, such as scooters,Turn the appliance on, allowing water to flow through the suction hose. Inspect the area for any leaks between the female and male adapters. that don't need as much power as a larger engine would provide.Most china silk road tour explore major cities such as Beijing, Xian, Shanghai and Dunhuang. Some tours even feature cruises down the Yangtze River.Stop your 2-cycle appliance or device by turning the start switch to the "off" position.

Disconnect the spark plug by pulling firmly on the rubber spark plug boot.Empty the fuel tank. How this is done depends on your 2-cycle engine. Some of them might have a plug for a fuel drain. If not,It is an ancient variety of poplar,Xinjiang China Tours, deciduous and when mature is capable of reach 50 feet in height, with some even reaching 98 feet in prime conditions. you can remove the fuel from the tank by siphoning it out or, in smaller 2-cycle engines such as those on chain saws and other gardening equipment, by simply turning the device upside down until the fuel drains out.Mobile crusher

Pull on the ends of the fuel hose that you want to replace, using needlenose pliers. In some devices, these hoses may be fastened by clamps. Loosen the clamps before removing the hose.Cut a new fuel hose to the same size, using the utility knife. Use the old hose as a guide.Stone crusherSlip the ends of the fuel hose over the ends of the fuel nipples. Secure with the hose clamp, if present.